Laserfiche WebLink
1 <br />2 <br />3 <br />4 <br />5 <br />6 <br />7 <br />8 <br />9 <br />10 <br />11 <br />12 <br />13 <br />14 <br />15 <br />16 <br />17 <br />18 <br />19 <br />20 <br />21 <br />22 <br />23 <br />24 <br />25 <br />26 <br />27 <br />28 <br />CRY ATTORNEY'S OFFICE <br />3900 MAIN SMELT <br />RUER51UL, CA 92522 <br />(951) 826-5567 <br />ORDINANCE NO. 7590 <br />AN ORDINANCE OF THE CITY OF RIVERSIDE, CALIFORNIA, <br />AMENDING CHAPTER 17.28 OF THE RIVERSIDE MUNICIPAL CODE <br />REGARDING MINIMUM GRADING STANDARDS AND GENERAL <br />REQUIREMENTS. <br />The City Council of the City of Riverside does ordain as follows: <br />Section 1: Section 17.28.020 of the Riverside Municipal Code is hereby amended as <br />follows: <br />"Section 17.28.020 Minimum Grading Standards and General <br />Requirements. <br />The following supplementary regulations shall apply to the grading of hillsides and arroyos. <br />A. Grading requirements. Where grading is proposed on any parcel having an average natural <br />slope of ten percent or greater, or which is zoned Residential Conservation (RC), or which <br />is located within or adjacent to the Mockingbird Canyon, Woodcrest, Prenda, Alessandro, <br />Tequesquite, or Springbrook Arroyos, or a blue line stream identified on USGS Maps, or <br />other significant arroyo, the grading must be confined per this chapter and limited to the <br />minimum grading necessary to provide for an approved dwelling unit or units, driveway, <br />garage and limited level yard. The ungraded terrain must be left in its natural form for the <br />remainder of the site. All hillside/arroyo grading shall conform to the following general <br />requirements: <br />8. Streets shall be designed to generally follow the natural contours and Iand farm in <br />order to minimize cut and fill. <br />9. Pads for any development in single family residential zones shall be limited as <br />follows: <br />a. Multiple pads may be allowed provided all other standards related to grading, slopes <br />and retaining walls are met and that they do not exceed the maximum pad size limits below. <br />b. Pad sizes shall be limited as follows: <br />